Body
Room Summary
Located on the first floor of Alamance, this space operates as a conference room that can seat up to 32 people. This room includes a projector and a touch panel that controls the technology in the room.
How to Use Room: Base Level Operations
- Tap the Crestron touch panel to turn on the system.
- The system will take 45 seconds to turn on.
- The system automatically connects to AirMedia.
- To choose a different input setting select VGA or HDMI.
- To turn off the system, tap the power button and tap, "Yes, power down."
Available Technology
Below is a list of all the available technology in Alamance 101.
| Equipment |
Manufacturer |
Model/Type |
| Touch Screen Control |
Crestron |
TSW-750-TTK-B-S |
| Projector |
Canon |
WUX6000 |
| Projector Screen |
Da-Lite |
Advantage |
| Laptop connectivity |
HDMI, VGA, Audio |
|
1.) Touch Screen Control (Crestron)
Basic Operating Instructions
- Touch the screen to turn on the system. The system will take 45 seconds to warm up.
- Use the touch screen control to select the desired input (VGA, HDMI, AirMedia).
- Press IMAGE MUTE, located on the top left to mute the screen image and adjust the height of the projector screen.
- To turn the system off, press the System Off button located on the top right of the touch screen control.
Laptop (HDMI & VGA) Instructions
- Choose the desired input.
- VGA
- HDMI
- For VGA connect the laptop using the VGA cord to the right of the desk.
- For HDMI connect the laptop using the HDMI cord to the right of the desk.
- Ensure that your device is on.
AirMedia Instructions
- Make sure that the Crestron system is on.
- Select the "AirMedia" option on the touch panel controller.
- A screen similar to the one shown below will be projected.
- Go the URL displayed at the top of the screen, it will take you to a page that looks similar to the one below.
- If you have not used AirMedia before in this room, download it by clicking on the respective buttons.
- Once you have downloaded it, locate it in your download folder and then open it.
- A small panel will appear on your device with an input box.
- Type in the Room Code that is projected at the bottom left of the projected screen into the input box on your device.
- Press the "Connect" button, and your device screen will appear on the projected screen.
- To stop presenting, click on the disconnect button.
2.) Projector (Canon)
- Touch the touch screen control to turn on the projector.
- Use the touch screen control to mute the projector.
- Turn the projector off by pressing the System Off button located on the top right side of the touch screen control.