Psychology and Human Service Studies 136

Conference room and study space with seating for 18 people.

Room Summary

    

 

 

This room is located in the middle of the hallway in the Psychology and Human Service Studies Building. It is a conference room and study space with seating for 18 people.

How to Use Room: Base Level Operations

1. Turn on the computer by pressing the power button located on the back bottom left of the monitor.
2. Turn on the touch panel controller by tapping the panel. It will take about 30 seconds to warm up.
3. Log into the computer using your Elon username and password.
4. Select your desired input using the touch panel controller (CMPTR, DVD, TV, or CD).
5. Turn off the computer by clicking the shut down button in the bottom right corner of the screen and then select the "Shut Down" option.
6. Turn off the touch panel controller by tapping the power button located on the top right of the panel.

Available Technology

Below is a list of the technology available in Psychology and Human Service Studies 136.

Equipment	Manufacturer	Model/Type
Touch Panel Control	Crestron	TSW-750-TTK-B-S
Computer	Dell	OptiPlex 5250 AIO
Projector	NEC	M352WS
Projector Screen	Da-Lite	Contour
Wall Plate	Crestron	DM-TX-200-2G
VCR/DVD Player	Toshiba	DVR620
AirMedia	Creston	AM-200
Laptop Connectivity	HDMI, VGA, Audio

 

1.) Touch Panel Control (Crestron)

Basic Operating Instructions

1. Touch the power button on the top right side of the touch panel to turn on the system.
   
2. The system will take 30 seconds to warm up.
3. Use the touch panel control to select the desired input.
4. To turn the system off, press the power button located on the top right of the touch panel control.
   
5. Select the "YES Shut Down System" button to turn off the system.

   Click on the images above to enlarge.

Desktop Instructions

1. Tap on the Computer tab, then select the "Desktop" option on the touch panel control.
2. Ensure that the computer is on. Log in using your Elon username and password.

Click on the images above to enlarge.

Laptop Instructions

1. Tap on the Computer tab, then select the appropriate "Laptop" option on the touch panel control depending on which cord type you will use.
2. Plug your device into the wall plate using an HDMI cord or the VGA and audio cords. These can be found in the cabinet below the desktop.
3. Ensure that your device is on.

   Click on the images above to enlarge.

AirMedia Instructions

1. Select the "AirMedia" option on the touch panel control which is within the Computer input tab.
   
2. A page similar to the one shown below will be displayed on the projector screen.
   
3. If you are using a Mac and require sound to be played through the room speakers, you will need to download SoundFlower. Click here for instructions on how to download it.
4. Type the IP address displayed at the bottom of the screen into a browser on your personal device.
5. If you have not used AirMedia before, download it by clicking on the respective buttons.
6. Type in the Room Code that is projected at the bottom left of the screen into the input box on your device.
7. Click on the "Connect" button, and your device's screen will appear on the projected screen.
8. To stop presenting, click on the disconnect button.

   Click on the image above to enlarge.

DVD/VCR Instructions

1. Select the "DVD/VCR" option on the touch panel control.
   
2. On the touch panel control, there will be a remote control displayed, as shown above.
3. Put your DVD or VCR in the player located in the rack in the cabinet.
4. Use the buttons of the control to control the DVD/VCR player.

   Click on the images above to enlarge.

TV Instructions

1. Select the "TV" option on the touch panel control.
   
2. On the touch panel there will be a remote system to use to change channels.

   Click on the images above to enlarge.

CD Instructions

1. Select CD from the touch panel control.
   
2. Insert CD into the DVD player on the rack in the cabinet.

 

2.) Computer (Dell)

Basic Operating Instructions

1. Turn on the computer by pressing power button which is located on the bottom right side of the computer monitor.
2. Login using your Elon username and password.
3. To mirror the image onto the projector screen, select the desktop input on the touch panel control.
4. To turn off the computer, press the power icon which can be found in the windows start menu.

 

3.) Wall Plate (Crestron)

Basic Operating Instructions

1. Connect the device to the wall plate using the HDMI or Composite cords.
   Composite:
    
   HDMI:
    
2. The Composite connection cords are found in the cabinet, but the HDMI cords must be brought.
3. Once the device is connected to the inits select the appropriate connection type on the touch panel controller.

 

4.) Projector (NEC)

Basic Operating Instructions

1. Touch the touch screen control to turn on the system. The system will take 30 seconds to warm up.
2. Use the touch screen control to select the desired input (CMPTR, DVD/VCR, TV, CD).
3. The projector will display whatever is selected on the touch screen control.
4. Turn the system off by pressing the System Off button located on the top right side of the touch screen control.

 

Additional Room Features

• This room has a portable white board available for use.