Moseley 106 - Moseley Kitchen

Room Summary

Photo of the Moseley Kitchen space Photo of the TV available in the space

 

 

Located on the first floor of Moseley, this room serves as a kitchen for student and organization use. This room includes a TV and a touch panel controlling the entire room.

Available Technology

Below is a list of all the technology available in Moseley 106.

Equipment Manufacturer  Model/Type 
1.) TV   Sharp  LC-60LE650U 
2.) Control Panel  Crestron  MPC-M10

1.) TV (Sharp)

Photo of the sharp TV available in the space

 

 

 

Basic Operating Instructions

  1. To turn on TV, press the POWER button on the remote or on the side of the TV.
  2.  To adjust the channel, press the up and down channel arrow buttons.
  3. To adjust the volume, press the up and down volume arrow buttons.
  4. To turn off TV, press the POWER button on the remote or on the side of the TV.

2.) Control Panel (Crestron)

Photo of crestron control push button panel showing the system in an off state Photo of the available wall connections for the computer to the TV

 

 

Basic Operating Instructions

System On:

  1. Press the System On button on the top left corner of control pane.
    1. The light will begin blinking to confirm the system is turning on.
  2. Wait approximately 30-45 seconds for the projector to warm up.

System Off:

  1. Press and hold the System Off button for approximately 3 seconds
  2. The light will begin to blink to confirm the system is shutting down.
  3. When light is done blinking, system is ready to be turned on again.
     

Laptop:

  1. Laptop connection is located on the front of the island in the middle of the kitchen.
  2. Connect the cable to the VGA Connector or HDMI Connector on your laptop.
  3. Select Laptop button on control panel.
    1. If the image does not appear, try toggling your computer. (Press Fn + F8 on Dell machines, Fn + F4 on Gateway machines)

Image Mute:

  1. Press the Display Mute button on the control pane.
    1. Both image and audio will be muted.
    2. light above Display Mute button will blink to confirm image has been muted.
  2. To unmute, either press Display Mute again or select one of the sources.

Volume:

  1. Volume is controlled by the knob on the far right of the control panel.
Print Article