Sankey 206

Room Summary

A photo of the room number from outside of the room.A photo of the room from the front door.A photo from the back of the room.

 

 

 

This room is located on the second floor of the Sankey Hall building and is designated as the Design Lab. The technology in this spaces is limited and up to the user to setup and operate.

Available Technology

Equipment Manufacturer Model/Type
Projector Canon WUX6010
Laptop Connectivity HDMI  

 

1.) Projector (Canon)

A photo of a Canon projector from the front.

Basic Operating Instructions

  1. Locate and unlock the projector storage cabinet.
    A photo of the projector storage cabinet from the front. A photo of the inside of a projector storage cabinet.
  2. Remove the projector and accessories from the cabinet.
      Cabinet Contents

    The following items are stored in the cabinet:A photo of the items that are stored in the storage cabinet. (A Canon projector, Canon remote control, 12ft HDMI cable, projector power cable, power extension reel)

    • Canon Projector
    • Canon Remote Control
    • 12ft HDMI Cable
    • Projector Power Cable
    • Power Extension Reel (optional use)
  3. Place the projector on provided cart in room.
    A picture of the Canon projector on a cart between two tables.
  4. Plug the cart or power extension reel into an available power outlet in the floor pocket.
    A photo of a closed power outlet in the floor pocket. A photo of an opened power outlet in a floor pocket. A photo of an extension cord close to the power outlet. A picture of an extension cord plugged into a power outlet.
    A photo of the back of a projector with the cords. A photo from the back of the projector with the cord plugged in to the power outlet.
  5. Connect the power cord to the projector and plug it into the cart or power extension reel.
    A photo of the directions for plugging in a projector.A photo of a power cord near the projector. A photo of a power cord connected to the projector.A photo of the back of the projector on a cart.A photo of the projector plug near a power extension reel.
  6. Connect the HDMI cable to the projector and plug into your device.
    A photo of the HDMI cable near the projector. A photo of the HDMI cable connected to the projector.
      Your device may require an adapter to connect a HDMI cable. Check your device's manual for connecting HDMI cables.
  7. Turn the projector on by pressing the power button on the remote or projector.
    A photo of the power button on the projector. A photo of the projector remote.
  8. Select an Input Signal - HDMI.
    A photo of instructions for selecting an input signal.
      The projector should already be set HDMI input. Change as needed.
  9. Zoom and Lens Shift have been preset. To adjust the size of image move the projector closer or further away from the wall. Focus can be adjusted from the remote.
    A photo of the projector from the back facing the wall.
  Turn the Projector off

Press the POWER button on the projector or with the remote. Press again to confirm shutdown.
A photo of instructions on how to power off the projector.

Return projector and accessories back to storage cabinet and make sure it is locked.

  Warning. Projector is Hot.

The projector is hot. Please allow the fan to cool the projector after turning off. The projector can be returned to the cabinet after the fan has stopped running. The projector may still be warm.

Additional Room Features

  • 2 mobile white boards

  • 9 whiteboards, which can be stacked, moved, and rearranged

  • 3 pushpin boards, which can be stacked, moved, and rearranged

 

Print Article