Belk Pavilion 201

Room Summary

Equipment Rack A photo of the room from the back.

 

This flexible classroom is located on the second floor of Belk Pavilion that can seat 20 people. It includes three projectors, rolling tables, and rolling chairs to support various classroom arrangements.

How to Use Room: Base Level Operations

  1. Turn on the computer by pressing the power button on the bottom right side of the computer monitor.
    • The second monitor will come on automatically with the first
  2. Login with your Elon username and password.
  3. To wake up the touch panel, tap the Elon Logo.
  4. Select the 'Typical Classroom' button and wait for the system to start up, this will take about 30 seconds.
  5. Select one of the tabs to switch inputs between Computer, DVD, VCR, CD, and AUX.
  6. To turn off the system, select the 'System Off' button located in the upper right hand corner of the touch panel, this will take 1:30 minutes.
  7. Turn off the computer by clicking the Power Off option in the Start Menu.

Available Technology

Equipment Manufacturer Model / Type
Touch Panel Crestron TSW-1050
Desktop Computer Dell Optiplex 7020
Projector (x3) Canon WUX7000Z
CD/DVD Player Sony DVP-NS57P
VCR JVC HR-S38OOU
Extra Monitor Acer X223W
Web Camera Avaya HC020
Laptop Connectivity  VGA, Audio, Ethernet  

 

1.) Touch Panel (Crestron)

Basic Operating Instructions

  1. To wake up the touch panel, tap the screen.
  2. Tap the Elon logo and select the 'Typical Classroom' button and wait 30 seconds for the system to start up.
  3. Choose from one of the tabs on the top of the screen to switch inputs between computer, DVD, VCR, CD, and AUX.

Computer Instructions

A photo of the screen under the CMPTR tab on the touch panel.

  1. Automatically the Desktop button will be pressed connecting with the desktop's visuals and audio to the projectors.
    A photo of the screen under the CMPTR tab on the touch panel.
  2. Select the Laptop - VGA button to connect your device to the projectors with the provided VGA cable.
    A photo of the screen under the CMPTR tab on the touch panel.
  3. Select the Laptop - DVI button to connect your device to the projectors with the provided DMI cable.
    A photo of the screen under the CMPTR tab on the touch panel.
  4. Select the Wall Input to connect your device to the projector.
    A photo of the screen under the CMPTR tab on the touch panel.
    This cord is not provided in the room so you will need to contact Media Services in order to obtain it.

DVD Instructions

A photo of the screen under the DVD tab on the touch panel. 

  1. Press the Power button located on the left of the DVD player to turn it on, and the eject button on the right to open the disc drive.
  2. Insert your DVD and press the eject button.
  3. Press the Play button to start the DVD.
  4. Press the Pause button to momentarily stop the DVD.
  5. Press the FWD or REW button to quickly move forward or backwards through the DVD.
  6. Press the FTRK or BTRK button to navigate the scenes of the DVD.
  7. Press the Menu button for more option to control the DVD.
  8. Press the Eject button to remove the disc from the DVD player.
  9. Press the Select button to chose specific controls for the disc.
  10. Press the up, down, left, and right arrows to navigate the menu options for the disc.
     

VCR Instructions

Photo of the crestron control touch panel with the VCR tab active Photo of the VCR located in the equipment rack

  1. Press the power button located on the left of the VCR and insert your VHS tape.
  2. Press the Play button to start the VCR.
  3. Press the Pause button to momentarily stop the VCR.
  4. Press the Stop button to stop the VCR.
  5. Press the FWD or REW button to quickly move forward or backwards through the VCR.
  6. Press the Eject button to remove the tape from the VCR player.
  7. Press the up and or arrow to change the channel of the tape.

CD Instructions

Photo of the crestron control touch panel with the CD tab active

  1. Press the Play button to start the CD.
  2. Press the Pause button to momentarily stop the CD.
  3. Press the FWD or REW button to quickly move forward or backwards in a song on the CD.
  4. Press the FTRK or BTRK button to change the songs of the CD.
  5. Press the Eject button to remove the CD from the CD player.

AUX Instructions

Photo of the crestron control touch panel with the AUX tab active

  1. Follow the screen for instructions on how to connect your device to the projectors.

Advanced Features

This room features three projectors, which can be used in the 'CATL Classroom' setup. This will allow you to route different sources to different projectors.

  1. To wake up the touch panel, tap the screen.
    Photo of the crestron control touch panel displaying the initial screen with instructions to touch the screen to begin
  2. Tap the Elon Logo and select the 'CATL Classroom' button and wait 30 seconds for the system to start up.
    Photo of the crestron control panel displaying choice for room mode CATL Classroom is highlighted
  3. Once the home screen pops up, select a projector on the left side of the Crestron control panel in order to access the different inputs.
    Photo of crestron control touch panel with computer tab active and options for individual projectors highlighted
  4. At the input page, select one of the eight options to control the projector such as:
  • The Desktop input which controls the main desktop computer.
    Photo of the crestron control touch panel with the computer tab active showing projector source as desktop
  • The Extended desktop input which displays the desktop to the right of the main desktop.
    Photo of the location of the power buttons on the monitor and extended monitor attached to the dell computer
  • Select the VGA tab to connect your device to the projector using the provided VGA cable.
    Photo of the crestron control touch panel highlighting the projector source as laptop-VGA
  • Select the DVI tab to connect your device to the projector using the provided DVI cable.
    Photo of the crestron control touch panel highlighting extended laptop - dvi option
    If your device does not have a VGA or DVI port, you will need an adapter in order to connect your device to the projector.
  • Select the Wall Input tab to connect your device to the projector.

    This cord is not provided in the room so you will need to contact media services in order to obtain it.
  • Select the AUX tab to connect your device to the projector using the provided AUX cable.
    Photo of the crestron control touch panel highlighting the AUX projector source
  • To view the DVD, select the DVD input to display the DVD onto the projector.
    Photo of the crestron control touch panel highlighting the DVD projector source
  • Select the DVD tab in order to control the DVD player.
    Photo of the crestron control touch panel with the DVD tab active
    For DVD player instructions, see the DVD tab.
  • To view the VCR, select the VCR input to display the VCR on the projector.
    Photo of the crestron control touch panel with the projector source highlighted as VCR
  • Select the VCR tab in order to control the VCR player.
    Photo of the crestron control touch panel with the vcr tab active
    For VCR player instructions, see the VCR tab.
  • Select the image mute button in order to mute the projector screen.
    Photo of the crestron control touch panel with the image mute option highlighted
  • Select the return button if you wish to return to the home page.
    Photo of the crestron control touch panel with the return button highlighted
  • Select the screen control tab to raise and lower individual screens.
    Photo of the crestron control panel with the screen control option highlighted

 

2.) Projector (Canon)

 

  1. To wake up the system, tap the Crestron touch panel.
  2. Tap the Elon Logo on the screen and select the Typical Classroom button and wait for the system to start up.
  3. On the Typical Classroom setting, choose an input from the one of the tabs to switch modes from computer, DVD, VCR, CD, and AUX.
    For individual tab instructions, see Touch Panel (Crestron).
  4. Once on the CATL Classroom home page, select a projector on the left side of the Crestron control panel in order to access the different inputs.
  5. At the input page, select one of the eight options to control the projector.
    For individual input instructions, see Advanced Operating Instructions.
  6. To turn off the system, select the 'System Off' button located in the upper right hand corner of the touch panel.
    A photo of the 'system off' button on the screen.

 

3.) Web Camera (Avaya)

The Avaya web camera

Basic Operating Instructions

This room is equipped with an Avaya HC020 web camera to use with web conferencing. Please review the articles below for additional information.

Connect Classroom Technology to Zoom
Connect Classroom Technology to Microsoft Teams

Additional Room Features

  • 2 portrait orientation rolling whiteboards

  • 6 portable whiteboards


Print Article